Find out what this means for your business
Find out what we charge and why
Read about water regulations
Access to the policy and supporting information
Find more about typical water supply issues
We own over 70,000 acres of land
Apply for a temporary water supply
Protect your business this winter
Complying with regulations, apply for a consent
Who's responsible for a leak, report a leak
Find out what's happening in your area
Find out who you need to contact and how
In this section, we're focusing on trade effluent, what it is and what it means to your business. If you want to learn more about trade effluent and how you can apply for trade effluent consent, you've come to the right place.
Find out below how our trade effluent services can help you.
Trade effluent is the liquid waste from a business or industrial process that passes to public sewer.
The liquid waste from various industries and processes is classed as trade effluent and includes liquid waste from car washes, laundrettes, metal finishing, textiles through to large chemical works, food and beverage manufacture etc.
Control of trade effluents applies to companies of all sizes and consents may be required for discharges of only a few litres per day and also to discharges that are made infrequently.
The definition of a trade effluent does not include toilets, sinks, personal cooking, and uncontaminated surface water drainage.
Wastewater discharges from hotels, pubs, restaurants, takeaways and caravan parks are not currently classed as trade effluent. However premises found to be discharging materials such as fats, oils, greases and food waste to sewer that cause blockages or affect the operation of water company assets, can be controlled under another part of the Water Industry Act.
A trade effluent consent is a legal document that is required if you wish to discharge trade effluent to the public sewer. It is in effect a licence giving permission to discharge to public sewer.
It contains however a number of conditions related to the volume, flow rate and nature of the effluent that are set to protect the environment and water company assets – the sewerage network, the sewage treatment processes and personnel (employees and general public), for example. Differing conditions and range of substances to be controlled may be set taking into account the industry type of the effluent and the receiving sewer and sewage treatment works.
There may also be conditions that require the discharger to provide apparatus that will measure and record trade effluent flows, pH and temperature etc. An automatic sampling machine may also be necessary.
Short term discharges such as contaminated groundwater from building projects or ground remediation, flushing of heating or cooling systems in commercial properties, etc. would be subject to temporary trade effluent consent arrangements.
We need to know if you plan to discharge anything other than domestic waste into the public sewer. It is your responsibility to obtain consent prior to commencing any trade effluent discharge.
If you are planning to discharge trade effluent to public sewer or you have an existing discharge that you think requires a consent please contact your appointed retailer to discuss further. They can offer advice on applying for a Consent or making a change to your existing Consent and may apply on your behalf.
If you do not know who your retailer is you can look on your previous water bill for this information or check the MOSL website.
From April 2017 all Trade Effluent applications or requests to change existing Trade Effluent discharges must be made using a national standard document, known as G/02 Form. Your appointed retailer should be able to assist you with this.
We require details of the process giving rise to the trade effluent discharge, your water usage and estimates of daily trade effluent volumes. In addition to completing the G/02 form you will also be required to provide a clear and comprehensive plan of the site drainage system showing the route taken by the trade effluent to the public sewer. An Example plan is shown here.
A designated sample point also needs to be identified and marked on the plan, where samples of the trade effluent can be obtained this is a legal requirement of a consent.
This point should be downstream of any treatment the trade effluent may receive but before it mixes with any other site drainage such as surface water or domestic effluent. The sample point should afford easy and safe access for sampling at all times.
There are charges associated with the application for, and subsequent issue of, a trade effluent consent and these are shown in our current charges scheme booklet.
It may not be possible, unfortunately, to meet with your requirements and consent may be refused. The reason that a Consent cannot be granted or changed will be discussed with you and or your Retailer and possible alternatives may be offered. Reasons for refusal may include lack of treatment capacity at the receiving sewage works, for instance.
If you want to learn more about trade effluent please contact us on;
Trade Effluent Team
PO Box 52
From April 2017 your trade effluent bill will be calculated based on information provided by Yorkshire Water Services (wholesaler) and your retailer to an independent market service provider, this is currently Market Operator Services Limited (MOSL).
Your billing services will be provided by your retailer and not by Yorkshire Water.
You can find more information about MOSL on their website.
The trade effluent charge is calculated taking into account the strength and volume of the trade effluent discharge. Not all trade effluents are therefore charged at the same rate although we do have regional charging strengths for vehicle washes and launderettes.
Generally a range of samples are taken and the average strength of these samples is used to calculate a unit charge for trade effluent i.e. a price per cubic metre of trade effluent. A formula known as the Mogden Formula is used to calculate this.
The formula comprises of four parts and they relate to charges for:
- the carriage of the trade effluent to the sewage treatment works via the public sewer
- preliminary treatment of sewage at the waste water treatment works (screening & grit removal)
- biological treatment of the sewage
- sewage sludge disposal & treatment
Yorkshire Water Services also charges separately for other trade effluent activities and this is detailed in our current trade effluent charges scheme booklet.
There is a minimum charge applicable to trade effluent accounts and this is detailed in our current trade effluent charges scheme booklet.
You can download the latest trade effluent charges below.
The trade effluent consent is a legal document and compliance with the conditions is a legal requirement, under criminal law.
You will be provided with analysis reports for every sample taken from your premises so you will be able to keep a record of consent compliance. Reports that show consent failures will generally be accompanied by a letter and your trade effluent adviser will be available to discuss the matter in more detail should it be required.
We have a trade effluent enforcement policy that details our approach to non-conformance. We aim for a firm but fair approach that offers proportionality and consistency (but not absolute uniformity as a number of factors need to be considered before any decision can be made).
Factors to be considered include past performance, significance and impact of failure etc.
Take a look at our copy of our Enforcement Policy for industrial waste consent.
Demand for water in Yorkshire increased by 125 million litres each day over…
Enthusiastic runners are being encouraged to sign up to the Kelda 10k, which…
An independent report released today (Tuesday 20 June) shows Yorkshire…